Competencies Checklist Personal Statement Example | Topics and Well Written Essays - 750 words

Competencies Checklist - Personal Statement Example The reporter stresses that "I fully understand the need for good behavior amongst young people and the principles that are essential in the guidance of children’s behavior in order to provide the best educational and social results. I am familiar with the major hypotheses required in educating young children, which are dependent on the learning abilities of young children. In addition, I am knowledgeable on the importance of developing children, families, and communities that create valuable relationships amongst young people. The family-children relation program further enables the families of young children to empower them through their relationships. I also have adequate knowledge of the history of my profession, which is an added advantage since I fully understand the needs that arise on any occasion. I am technologically educated, and I use this ability to assist the children in my classroom to learn more efficiently. I am aware of the ethics that are involved in educating young children and I fully employ them in my teaching center in order to develop disciplined individuals. I am also able to deliver education and quality care by employing the Pearson education model. I fully comprehend the needs of assessing young children and documenting the reports for reference. I also engage in programs that involve studying and teaching, which are helpful in increasing my knowledge about my career and increasing my competency. I am currently taking a degree on CDA in order to further my teaching career. I have written my philosophy of teaching, which is consistent with my actions when carrying out my responsibilities. I am also keen on keeping my teaching up to date and understand the contemporary issues in the society."

Introduction to Philosophy Essay Example | Topics and Well Written Essays - 2250 words

Introduction to Philosophy - Essay Example The next part in Plato’s model is ‘belief’. At that part, reality or ‘truth’ is made based on one’s superstition, views of reality, and actual objects. Belief is an emotional state that becomes a part of an individual because of the powerful influences of culture, religion, or any widely believed aspect of the period. Beliefs that are based on religion are impossible to challenge because knowledge is strongly tied by the influences of religion. A person’s belief in heaven and hell and the presence of saints are some examples of knowledge at this part. The third stage is ‘scientific knowledge’. This stage is shown by mathematical formula, research, and empirical data. Some examples are medicine, law of inertia, gravity, and so on. The top part of knowledge is ‘reasoning’, defined as the rational combination of all forms of knowledge. The vertical line from the lowest stage to the highest one shows that there is a certain extent of knowledge gain at every stage, but as the line moves from the bottom kinds of truth to the top, there is a related movement from the lowest level of reality to the highest. The line is broken up into two very different parts. The higher and bigger part is a symbol for the intelligible area and the lower, smaller part is a symbol for the visible part. This unbalanced separation represents the lower level of truth as located in the visible part in comparison to the higher reality in the intelligible domain. As shown in the earlier diagram, the lowest kind of knowledge is ‘eikasia’ (imagination). Imagination is the shallowest kind of brain work where the mind deals with impression or the least level of truth. Obviously, imagining may refer to the act outside plain appearances of objects to their inner truth. However, Plato defines imagining as the senses view of appearances i n which such appearances are understood as the truth. On the other hand,

Buisness Essay Example | Topics and Well Written Essays - 3750 words

Buisness - Essay Example as a template for a business proposal for a new Blackberry accessory company in the UAE, as a benchmark for how best to gain consumer interest and which specific aspects of design should be left out. This new business is described in this report, along with a discussion of the current business environment in the UAE in order to determine whether the new online company, Mobile by Design, can actually be competitive and turn a profit in a growing business climate. There is evidence that there is a high consumer demand not only for Blackberry and other mobile technology products, but a strong e-procurement system is also being developed which will assist in the supply chain needs of the new start-up internet commerce company. With various partnerships, trade show promotions, and print advertisements (amongst other opportunities for promotion), Mobile by Design intends to corner the UAE market in the sale of these devices. The promotional and consumer segmenting plans for this new busine ss are described in this paper. Two online companies selling different consumer merchandise were compared and contrasted in order to determine whether they were designed and launched according to web site design principles. These two e-commerce websites are Musicroom.com and Amazon.co.uk. Musicroom is an online company selling to specific niche markets in the music industry, with their products ranging from music sheets to musical instruments, as well as various CDs and DVDs associated with the music industry. Amazon.co.uk is a conglomerate online organisation selling everything from bedding sheets to bulk food products and services not only the UK, but the whole of the Amazon.com company services a multi-national consumer audience. Musicroom.com utilises very eye-catching graphics on the company’s home page, using a blend of different, vibrant yellows, reds and blues in order to enhance the users’ visual perception of the company and its website design. Seigel (2005) offers that

Financial accounting Math Problem Example | Topics and Well Written Essays - 500 words

Financial accounting - Math Problem Example You should not provide impairment losses in the financial statement as these will decrease our reported profit and may be misleading for tax authorities and shareholder. We have a responsibility of disclosing fair and accurate information, therefore we should not provide for impairment losses until we want to close our operations. Our business investment buildings will be included at their fair value according to the judgment of auditors in the balance under long-term leases head. This will be done according to IAS 16 principles which calls for fair-value to be include in the balance sheet. Fair value consists of costs less depreciation less impairment losses. Since, we are not charging any depreciation, we can simply state these building at their NRV that according to you come around $2.5 Million. You have also asked me about how to treat grants. You are right about the fact that we can treat it as deferred income. IAS 20 allows us to treat it as deferred income. However, this option may increase will increase our profit and will also result in more tax payments. So, it is better to not treat it as tax income and instead amortize it completely by adjusting it with the purchase of fixed assets.

Buisness Essay Example | Topics and Well Written Essays - 3750 words

Buisness - Essay Example as a template for a business proposal for a new Blackberry accessory company in the UAE, as a benchmark for how best to gain consumer interest and which specific aspects of design should be left out. This new business is described in this report, along with a discussion of the current business environment in the UAE in order to determine whether the new online company, Mobile by Design, can actually be competitive and turn a profit in a growing business climate. There is evidence that there is a high consumer demand not only for Blackberry and other mobile technology products, but a strong e-procurement system is also being developed which will assist in the supply chain needs of the new start-up internet commerce company. With various partnerships, trade show promotions, and print advertisements (amongst other opportunities for promotion), Mobile by Design intends to corner the UAE market in the sale of these devices. The promotional and consumer segmenting plans for this new busine ss are described in this paper. Two online companies selling different consumer merchandise were compared and contrasted in order to determine whether they were designed and launched according to web site design principles. These two e-commerce websites are Musicroom.com and Amazon.co.uk. Musicroom is an online company selling to specific niche markets in the music industry, with their products ranging from music sheets to musical instruments, as well as various CDs and DVDs associated with the music industry. Amazon.co.uk is a conglomerate online organisation selling everything from bedding sheets to bulk food products and services not only the UK, but the whole of the Amazon.com company services a multi-national consumer audience. Musicroom.com utilises very eye-catching graphics on the company’s home page, using a blend of different, vibrant yellows, reds and blues in order to enhance the users’ visual perception of the company and its website design. Seigel (2005) offers that

The Phoenix hospital Essay Example for Free

The Phoenix hospital Essay The Phoenix Hospital has asked me to create a computer application to replace the existing manual one. In this system patient details have to be kept and information about borrowing of equipment. Records must be kept of what equipment has been borrowed, by whom and when, and also if any equipment is not available because it is being repaired. Aim My aim is to successfully create a database for the hospital, which they can4 use on an everyday basis. The database will need to: Ability to store details of equipment. Item code to identify the item and the type of equipment.   For each piece of equipment it must find:- whether it is available, being repaired or out on loan if on loan, to whom and at what address or ward number if on loan, when is it due to be returned or the loan renewed if being repaired, when was it sent for repair   Produce a hard copy of the above information for any piece of equipment.   Equipment is lent out for a 6- week period, this can be renewed for periods of 6 weeks.   Patients may have more than one piece of equipment on loan at a particular time.   At any one time, about half the equipment will be out on loan and 1 or 2 pieces will be in for repair. Names and addresses of patients are to be invented. Ward numbers are W1- W10. At the end of each week, a full report of the location of all equipment is to be produced. If equipment is due for return or renewal during the following week, that patient will be contacted. There is a standard letter for this purpose. Design Definition of Data Requirements I need to design tables, forms and queries which will enable me to meet the above aims. Record Structure Patient Table Field Name Data Type Field Length/ Format Validation Rule Input Mask Patient id AutoNumber Long Integer Title Text 5   Forname Text 50- Surname Text 50   gender Text Loan ID Number Long Integer   Item ID Text 50 Returned Yes/No   Figure 6 Loan Table Record Structure Design of Forms Patient Form Figure 7 Design of Patient Form Equipment Details Form Figure 8 Design of Equipment Details Form Welcome Screen Form Figure 9 Design of Welcome Screen Repair Form Figure 10 Design of Repair Table Design of Reports Locations Report Figure 11 design of Locations Report Equipment on Loan at End of Week Report Figure 12 Design of Equipment on Loan at End of Week Report Security and Integrity of Data Security and integrity are very important aspects of a database. I have made sure the database is secure from hackers, thieves and from general mistakes messing up the system. Security can be done using passwords to keep out people who shouldnt access areas. There are different levels of access rights these are read-only, Read/Write and No Access. Backup can help keep hold of important data in the event of the system being destroyed. Therefore the more frequently that backups are done the better. Integrity will minimize the amount of errors going into the system. Validating data in the database will help keep it in good working order and make it easy to search for data when needed.

Project Design of Portable Stand for Tablet Computer

Project Design of Portable Stand for Tablet Computer 1.1 Customer Specification We were approached by a leading computer brand to design a small, lightweight and portable stand that can be used for any of the companys tablet computers. The company had a strong emphasis on the product being portable and the ability to fit into the end users pocket. The product should allow the end user to easily watch movies, read eBooks, surf the web, conduct a presentation, view photos and much more. The company would be looking to retail this product at  £11.99 and each unit should cost no more than  £4 to manufacture. They have also given us 12 months to complete the design with a prototype to be viewed in month 9. 1.2 Design Specification After considering the customers specification we began to brainstorm to generate possible solutions. First of all the product is to be small and lightweight which makes the material to be used one of the most important factors. Due to the low production price the stand will be made from ABS plastic resin which can be injection moulded. The stand will consist of 5 injection moulded parts which are connected by screw pivot barrels. The bottom of the tablet will feature a non-skid cushioned pad which will allow the stand to be used almost anywhere. Width (Folded)2.5 cm Length (Folded)17.8 cm Height (Folded)2.5 cm Weight 85g No of moulded parts5 1.3 Safety Considerations The first point of action is to identify all safety and non-safety critical engineering safety considerations, Customer safety requirements and design safety requirements. For doing this there are many techniques that will be used: Risk Assessment Identify hazards Observe what actually happens and identify hazards that can reasonably be expected to be present. Attention will be taken to any significant hazards which could cause serious harm or affect a number of people. Employees will be asked for their views as they may be aware of hazards which are not immediately obvious. Who can be harmed? Everyone should be taken into consideration during the risk assessment, including individuals who may not be present at all times. Evaluate risk- This will assess the likelihood that harm from a particular hazard may happen whilst also taking into consideration the precautions already in place. Record findings- Significant findings must be recorded by writing them down. Details of how the assessment was made will be unnecessary. Written documents should be kept for future reference as they may help to demonstrate that legal obligations have been met. Review and arise- The whole process will be reviewed and new processes or procedures introduced can then lead to new hazards which would result in the need for a new review of all assessments to be carried out to keep them up to date. Failure Mode and Effects Analysis FMEA This analytical technique explores the effects of failures or malfunctions of individual components in a system. This will be the first step of a reliability study. This will involve reviewing all the components and assembly of the stand to identify failure modes and their causes and effects. If any part of the stand fails what will be the result? The development of the design and testing of the product should ensure that failures have been eliminated or the risk has been reduced to an acceptable level. Advantages: Improve the quality, reliability and safety of the product Improve company image and competitiveness Increase user satisfaction Reduce system development time and cost Reduce the potential for warranty concerns Early identification and elimination of potential failure modes Increases teamwork and idea exchange Reduce the possibility of same kind of failure in future Fault Tree Analysis This is a graphical technique that will provide a systematic description of the combinations of possible occurrences in a system. This can result in an undesirable outcome. This analysis method will be used to understand how things can fail and to identify the best way to reduce the risk of these happening. Fault tree analysis will be used to: Understand the logic leading to the undesired state Show compliance with safety/reliability requirements Prioritize the contributors leading to the undesired state/event Monitor and control the safety performance Minimise and optimise resources Assist in the design of the product Function as a diagnostic tool Event Tree Analysis This will allow us to see what pathway is creating the greatest probability of failure. This is based on binary logic where an event has or has not happened. It is valuable in analysing the consequences arising from a failure or undesired event. The event tree will begin with an initiating event. The consequences of this event are followed through a series of possible paths where each path will be assigned a probability of occurrences allowing them to be calculated. Advantages: Enables the assessment of multiple faults and failures No need to anticipate end events Areas of single point failure, system vulnerability may be identified and assessed Allows resources to be deployed properly Work can be computerized Visual cause and effect relationship Relatively easy to learn and execute Follows easy to see fault paths Combines hardware, software, environment, and human interaction Permits probability assessment Commercial software is available 1.4 Project Schedule Month à ¯Ã†â€™Ã‚  Event à ¯Ã†â€™Ã‚ ¢ Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Jan Problem Identified Initial research Develop Product Build Prototype Testing Redesign Communicate and conclude Problem Identified The customer provided us with their specification required for the proposed new product.Initial research After Looking over the customer specification research will be conducted to see what products already exist. A brainstorming session will then take place to come up with potential solutions including pro and con lists. From these a best product will then be selected to go ahead and produce.Develop Product Once the best possible product has been identified the key requirements for each feature is selected. This will then give and idea of materials needed and how they will construct the tablet. This will then allow costs to be calculated.Build Prototype First of all the prototype will be created using CAD software in two and three dimensions. This prototype created in CAD will have all dimensions with tolerances and finishes. This will then be passed onto the production team to construct. This will also be shown to the customer at this stage to ensure it meets exp ectation.Testing Once the prototype arrives it must be tested and evaluated to determine if it works and meets the original customer specification. Minor adjustments may be needed at this point to finalise the design.Redesign Using the information gathered during testing, evaluation of the design the solution can then be optimised and revised to achieve better results.Communicate and conclude The final product will be shown to the customer before mass production will follow depending on the feedback from the customer. 2.1 Manufacturing considerations. The prototype was originally modelled using 3d CAD software from where this design was then passed on to the production team to create a solid model of the stand. The prototype did function in the correct manner but the weight was a slight issue. With the product being designed to be portable the weight would need to be reduced. It was decided that the solid components would be hollowed and supports would be set between each side of a component to strengthen them. The total cost for production has been set not to exceed  £4 per unit. The intention is for the stand to be mass produced to decrease product cost and increase profit margin. Due to the small nature of each individual part the best possible way of constructing these will be to use the injection moulding process. Injection moulding is one of the leading methods of producing plastic components. This is a fast process which is used to produce a large number of identical items. After considering many different materials it was established that ABS plastic resin met all the characteristics needed to form each component whilst also being cheaper than many of the other materials available. The companys current injection moulding machine will be used for making the 5 plastic resin components. A 3d model of this is shown below: The clamping end with moving platen takes half of the mould tool. This opens and closes the mould and supplies sufficient force to keep the mould closed when molten ABS resin is injected under pressure. The injection unit takes plastic raw plastic resin granules, heats them until molten, and injects them into the mould. The rotating screw forces the plastic along the barrel. When the right amount of material for the next shot has accumulated the screw stops rotating. The screw then acts like a plunger moving forward and forcing the molten plastic into the mould tool. Materials There were many different materials that could be used for making the individual parts but after much consideration it was decided that ABS plastic resin pellets would be used. ABS is a thermoplastic resin commonly used for injection moulding applications. ABS (Acrylonitrile Butadiene Styrene) possesses medium strength and performance at a low cost. It is available in multiple grades, colours, and Izod impact ratings. ABS Features Benefits: Easily machined Tough Low cost Rigid High impact strength Ideal for moulding Good chemical and stress cracking resistance Excellent abrasion resistance; electrical properties, moisture and creep resistance. Availability At the moment ABS pellets can be purchased from Zibo City Linzi Yixiang Chemical Co. Ltd. In China and shipped to the UK for  £1000 per Metric Ton which is 1000000grams. Each rotational part will be held together by 5g pivot barrels also shipped from Asia costing  £0.20p per unit. With each fully built unit weighing in around 85grams and requiring 3 pivot barrels each unit would cost: 1000000/70=14286 units  £1000/14286= 0.6p per unit in ABS material ABS material + 3 pivot barrels =  £0.66p per unit material cost. This price does not include cost of production. 2.2 Simulation/Modelling The design process will utilize the use of CAD to produce the trailers drafting and design. By using CAD this will allow the quality of the design to be improved whilst also speeding up the design process. The drafted design of the trailer will be used by any professional involved in the construction of the trailer. 3d simulation also allows for real life situations to be tested prior to the build. Advantages and disadvantages of using CAD Advantages Can be more accurate than hand-drawn designs which reduce human error. You can save and edit ideas, which make it easier and cheaper to modify your design as you go along. You can modify existing ideas, which saves time. Disadvantages The software itself can be expensive so initial costs are high. Staff need to be trained how to use the software, which also adds to costs. Requires a PC. Safety Considerations Although the product is fairly small and compact there are still many safety issues that need to be taken into consideration. Legislation should also be adhered to. Plastic materials are generally inert and lend themselves to product safety. The safety of plastic materials and products which will be used by users and consumers is extremely important to the company and to the industry as a whole. The cost problems associated with exercises such as product recalls and product failure could have a negative image on the company. The risk assessment technique used for tablet stand was a Fault Modes and Effects Analysis (FMEA). This method will explore the effect of malfunctions and failures for the individual parts of the product whilst also looking at what can happen within the working environment. The essential questions which are asked in regards to the working environment are: What are the hazards? Who could be harmed and how? What are the effects? What is currently done? Can anything else be done? What are the hazards? Who can be harmed and how? Whats being done? What can be done? Slips and trips Staff/contractors may be injured if they trip over objects or slip on spillages. à ¢-   Procedures for oil spillages in place and are adhered to à ¢-   Floors are in good condition à ¢-   Staff wear safety shoes à ¢-   Good lighting throughout No further action required Use of injection machinery Staff/contractors may suffer serious injury from unguarded moving parts of machinery à ¢-   All dangerous parts of machinery guarded to manufacturers standards à ¢-   All new machinery checked before first use à ¢-   Machinery guards are properly maintained and inspected No further action required Workplace transport Staff may suffer serious, fatal, injuries if struck by a vehicle or fork lift truck. à ¢-  Good segregation measures are on site, à ¢-   All staff, including contractors, wear hi-visibility work wear à ¢-   Annual safety inspections Provide safety rules before jobs begin Manual handling Staff may suffer back pain from handling heavy/bulky objects. à ¢-  Staff are trained in safe manual handling à ¢-   Safe system of work agreed à ¢-   Manual handling aids are No further action required Fire Staff could have fatal injuries from smoke inhalation or burns. à ¢-  Fire risk assessment had been previously done, and any necessary action taken, à ¢-   Staff and contractors told of fire and evacuation policy No further action required Noise Staff may suffer discomfort and potential hearing damage if working in noisy areas or using noisy equipment. à ¢-   If possible, jobs in production areas done when the injection moulding machines are not in use à ¢-   Staff provided with ear defenders or suitable hearing protection when required à ¢-   Machinery is maintained to ensure they run as quietly as possible No further action required The essential questions which are asked in regards to the product are: How can each part fail? What might cause this failure? What will the effects of failure be? How serious are these failures? How are the failures detected? Component Potential Failure Potential effects of failure Severity Potential causes of failure How will failure be detected Action to control risk Plastic Parts Breaking Unusable and possible tablet breakage II End user misuse Visual Instructions provided Plastic Parts Melting Product wont function II End user misuse Visual Instructions provided Plastic Parts Wear and tear Unstable I Overuse Visual Warranty Plastic Parts Causing harm End user harm. Potential Legal issues III Finishing Visual Instructions provided Pivot Screws Breaking Unusable and possible tablet breakage II End user misuse Visual Instructions provided Pivot Screws Wear and tear Still usable but not 100% I Overuse Visual Warranty The level of risk is determined by: Risk = probability of failure * Severity factor Severity Categorised Category Probability Description I Minor Functional failure of part of machine or process no potential for injury II Critical Failure will probably occur without major damage to system or serious injury III Major Major damage to system and/or potential serious injury or personal IV Catastrophic Failure causes complete system loss and/or potential for fatal injury Probability Categorised Level Probability Individual failure mode A 10-1 Frequent Likely to occur frequently B 10-2 Probable Likely to occur several times in the life of the product C 10-3 Occasional Likely to occur sometime in the life of the product D 10-4 Remote Unlikely to occur but possible E 10-5 Improbable So unlikely that occurrence may not be experienced A RP1 High Risk B RP2 C RP3 Medium Risk D Low Risk E I II III IV Severity Category Legislation The company currently adheres to ISO 9001:2008 for the plastic sector which aims to improve the efficiency of all operations within the sector, whether in manufacturing or distributing. 2.4 Details of the final design 3.1 Product Evaluation. When evaluating the design there are a wide range of methods and strategies. The one used in this instance is: F.A.C.E. value Function What does it do and how does it work? Aesthetics Is it attractive, why and what makes it so? Construction What is it made from, how and why? Economics How much does it cost and is this good value for money? Function: The stand will hold a number of current products in landscape or horizontal position for ease of use. Aesthetics: The product was never designed to be good looking but functional. Construction: The product was eventually made from ABS plastic resin due to its properties and cost. The constructed parts are held together with pivot screws due to their cost and ease of use. Economics: The customer had given us a maximum price to work too which enabled us to use strict guidelines when it came to purchasing products. Most of the materials were imported from China due to price issues. Although the product may seem good value money from our point of view, this may not be replicated by the end customer. 3.2 Team Working. Although everyone was not capable of working within a team, the selected group which were proved that teamwork has many benefits. The team worked more efficiently and speed was also increased compared to individual workers. This method also offered support for any members ideas. Creativity Increases: The group brainstorming activity process provided incredible results. Everyone came up with their own vision of the best way of creating the product to the customer needs. The team then decided which idea was the best and then continued to develop this in detail together. This was an invaluable process where team members could give instant feedback on what they thought what would and wouldnt work. Speed: Individuals have different strengths and weaknesses. When it came to tackling the project together the team delegated the workload among themselves according to each others skills. This no only saved time but it also allowed distribution of work within the team ensuring everything was done in the best possible way. Effect on Worker Morale: As staff members were working closely together as a successful team, they spend more time together and begin to know each other. This then created a good relationship between the employees. They started to feel proud of what they had achieved ad contributed to the project which also made them feel good about themselves. This seemed to help their self-esteem. Effect on Individual Responsibility: The overall product was produced by teamwork; all the team members felt they had to deliver to their highest abilities. Everyone had a clear understanding that they were responsible for a specific task and the entire team was depending on them doing a good job. 3.3 Evaluation of Safety During the design process safety was one of the main aspects to consider. Many materials were considered but due too certain aspects whether it was finishing or the product being fire retardant. ABS was eventually picked as this would reduce risk in the overall design of the product. The risk assessments carried out for the workplace proved invaluable as this gave the company a clear indication of what was currently being done within the working environment and what could still be done to improve the safety.